No relevant resource is found in the selected language.
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Drive Configuration
Drive Configuration
Table 2-5 Drive configuration
Configuration
Max. Front Drives
Drive Management Mode
2 x 2.5" SATA and 3 x 2.5" NVMe drive configuration[1]
5
Slots 0 and 1 support only SATA drives.
Slots 7 to 9 support only NVMe drives.
SATA drives: directly connected to the CPU
NVMe drives: directly connected to the CPU
2 x 2.5" SAS/SATA and 3 x 2.5" NVMe drive configuration[2]
5
Slots 0 to 1 support only SAS and SATA drives.
Slots 7 to 9 support only NVMe drives.
1 x PCIe RAID controller card
2 x 2.5" SAS/SATA +6 x 2.5" NVMe drive configuration[3]
8
Slots 0 to 1 support only SAS and SATA drives.
Slots 2 to 3 and slots 6 to 9 support only NVMe drives.
1 x PCIe RAID controller card
2 x 2.5" SATA +6 x 2.5" NVMe drive configuration[4]
8
Slots 0 and 1 support only SATA drives.
Slots 2 to 3 and slots 6 to 9 support only NVMe drives.
SATA drives: directly connected to the CPU
NVMe drive: directly connected to the CPU
2 x 2.5" SATA + 8 x 2.5" SAS/SATA drive configuration[5]
10
Slots 0 and 1 support only SATA drives.
Slots 2 to 9 support only SAS and SATA drives.
SATA drives: directly connected to the CPU
SAS/SATA drive: 1 x PCIe RAID controller card
[1]: Slots 0 and 1 do not support drive fault indicators. Slots 2 to 6 are empty and do not support drives.
[2]: Slots 2 to 6 are empty and do not support drives.
[3]: Slots 2 to 3 and slots 6 to 9 support only x2 PCIe link width. Slots 4 and 5 are empty and do not support drives.
[4]: Slots 0 and 1 do not support drive fault indicators. Slots 2 to 3 and slots 6 to 9 support only x2 PCIe link width. Slots 4 and 5 are empty and do not support drives.
[5]: Slots 0 and 1 do not support drive fault indicators.