Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Physical Structure
Figure 1-2 shows the components of the device.
Figure 1-2 Components
![]()
1 |
Copper bar module |
2 |
NPU liquid-cooled heat sink |
3 |
NPU board |
4 |
NPU air duct |
5 |
Support beam |
6 |
Drive backplane |
7 |
Drive |
8 |
Fan module |
9 |
Mainboard air duct |
10 |
Chassis |
11 |
FlexIO card |
12 |
Power supply unit (PSU) |
13 |
Power module |
14 |
Riser module 2 |
15 |
Riser module 1 |
16 |
Mainboard |
17 |
CPU liquid-cooled heat sink |
18 |
DIMM |
CPUs are integrated on the mainboard and cannot be replaced independently. NPUs are integrated on the NPU board and cannot be replaced independently.