Drive Indicators
SATA Drive Indicators
Figure 2-16 shows the SATA drive indicators.
Drive Activity Indicator (Green Indicator) |
Drive Fault Indicator (Yellow Indicator) |
Description |
|---|---|---|
Steady on |
Off |
The drive is in position. |
Blinking at 4 Hz |
Off |
Data is being read or written normally, or data on the primary drive is being rebuilt. |
Steady on |
Blinking at 1 Hz |
The drive is being located by the PCIe plug-in RAID controller card. |
Blinking at 1 Hz |
Blinking at 1 Hz |
The data on the secondary drive is being rebuilt. |
Off |
Steady on |
A member drive in the RAID array is removed. |
Steady on |
Steady on |
A member drive in the RAID array is faulty. |
NVMe SSD Indicators
Figure 2-17 shows the NVMe SSD indicators.
Drive Activity Indicator (Green Indicator) |
Drive Fault Indicator (Yellow Indicator) |
State Description |
|---|---|---|
Off |
Off |
The NVMe SSD cannot be detected. |
Steady green |
Off |
The NVMe SSD is detected and working properly. |
Blinking green (2 Hz) |
Off |
Data is being read from or written to the NVMe SSD. |
Off |
Blinking yellow (2 Hz) |
The NVMe SSD is being located or hot-swapped. |
Off |
Blinking yellow at 0.5 Hz |
The NVMe SSD completes the hot removal process and is removable. |
Steady green or off |
Steady yellow |
The NVMe SSD is faulty. |
