Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Drive Configuration
Drive Configuration
Table 2-7 Drive configuration
Configuration
Maximum Front Drives
Drive Management Mode
2 x 2.5" SATA + 3 x 2.5" NVMe drive configuration [1]
5
Slots 0 to 1 support only SATA drives.
Slots 7 to 9 support only NVMe drives.
Connected to a CPU using SATA
2 x 2.5" SAS/SATA + 3 x 2.5" NVMe drive configuration [2]
5
Slots 0 to 1 support only SAS and SATA drives.
Slots 7 to 9 support only NVMe drives.
1 x RAID controller card
3 x 2.5" SAS/SATA + 6 x 2.5" NVMe drive configuration [3]
8
Slots 0 to 1 support only SAS and SATA drives.
Slots 2 to 3 and slots 6 to 9 support only NVMe drives.
1 x RAID controller card
2 x 2.5" SATA + 6 x 2.5" NVMe drive configuration [4]
8
Slots 0 to 1 support only SATA drives.
Slots 2 to 3 and slots 6 to 9 support only NVMe drives.
Connected to a CPU using SATA
2 x 2.5" SATA + 8 x 2.5" SAS/SATA drive configuration [5]
10
Slots 0 to 1 support only SATA drives.
Slots 2 to 9 support only SAS and SATA drives.
Connected to a CPU using SATA
1 x RAID controller card
[1]: Slots 0 and 1 do not support drive fault indicators. Slots 2 to 6 are empty and do not support drives.
[2]: Slots 2 to 6 are empty and do not support drives.
[3]: Slots 2 to 3 and slots 6 to 9 support only x2 PCIe link width. Slots 4 and 5 are empty and do not support drives.
[4]: Slots 0 and 1 do not support drive fault indicators. Slots 2 to 3 and slots 6 to 9 support only x2 PCIe link width. Slots 4 and 5 are empty and do not support drives.
[5]: Slots 0 and 1 do not support drive fault indicators.