Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the Server over a Serial Port Using PuTTY
Use PuTTY to log in to the server over a serial port in any of the following scenarios:
- The server is configured for the first time at a site.
- A remote connection to the server cannot be established.
- Visit the chiark website and download the PuTTY software from the homepage.
- PuTTY of an earlier version may cause server login failures. You are advised to use PuTTY of the latest version.
Procedure
- Double-click PuTTY.exe.
The PuTTY Configuration window is displayed.
- In the navigation tree, choose Connection > Serial.
- Set the login parameters.
Example:
- Serial Line to connect to: COMn
- Speed (baud): 115200
- Data bits: 8
- Stop bits: 1
- Parity: None
- Flow control: None
n in COMn indicates a serial port number, and its value is an integer.
Figure 8-15 PuTTY Configuration - Serial - In the navigation tree, choose Session.
- Select Serial under Connection type, as shown in Figure 8-16.
- Set Close window on exit to Only on clean exit, as shown in Figure 8-16.
Set Saved Sessions and click Save. Next time you can simply double-click the saved settings under Saved Sessions to log in to the server.
- Click Open.
The PuTTY window is displayed.
- Enter the user name and password.
If the login is successful, the server host name is displayed on the left of the prompt.
