Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the iBMC WebUI
The following uses Internet Explorer 11.0 as an example.
For details about PC system configuration requirements, see the Atlas 800 AI Training Server iBMC (V3.01.00.00 or Later) User Guide (Model 9000).
- Connect the local PC to the iBMC management network port on the server using a crossover cable or twisted pair cable.
Figure 5-32 shows the network diagram.
- Open Internet Explorer on the local PC.
- In the address box, enter the iBMC address in the format:
https://IP address of the iBMC management network port on the server
Example: https://192.168.2.100
- Press Enter.
The iBMC login page is displayed, as shown in Figure 5-33.
- If the message "There is a problem with this website's security certificate" is displayed, click Continue to this website (not recommended).
- If the system displays the Security Alert dialog box indicating a certificate error, click Yes.
- On the login page, enter the user name and password.
The default user name is Administrator, and the default password is Admin@9000.
If the account is locked due to five consecutive failed attempts, try again in 5 minutes.
- In the Domain drop-down list, select Local iBMC or Automatic matching.
- Click Log In.
If the login is successful, the Home page is displayed. You can see the login user name by moving the cursor to
in the upper right corner of the page.
in the upper right corner of the page.
