Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Connecting Cables to a Mouse, Keyboard, and VGA Port
The front and rear panels of the server have DB15 VGA ports but no standard PS/2 port for a keyboard or mouse.
Connect a keyboard or mouse to a USB port on the front or rear panel if needed, either directly or with a USB-to-PS/2 cable.
- Wear an ESD wrist strap. For details, see ESD Wrist Strap.
- Plug the USB connector on the PS/2 cable into the USB port on the front or rear panel of the server.
- Connect the connectors on the other end of the PS/2 cable to the keyboard and mouse.
- Connect the DB15 connector on the VGA cable to the VGA port on the front or rear panel of the server and tighten the two screws.
- Connect the other end of the VGA cable to the VGA port on the monitor and tighten the two screws.Figure 5-19 Connecting PS/2 and VGA cables
