Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Process
Figure 5-28 shows the initial configuration process of the Atlas 800 training server (model 9000).
Table 5-4 describes the initial configuration process.
Table 5-4 Configuration process
Step |
Action |
|---|---|
Query the IP address of the management network port. |
Query the IP address of the management network port. |
Log in to the iBMC WebUI. |
Log in to the iBMC WebUI from a local PC. |
Check the server. |
|
Change the initial passwords. |
Change the initial passwords:
|
Configure RAID. |
Configure RAID for the server. For details, see Atlas 800 Training Server RAID Controller Card User Guide (Model 9000). |
Configure the BIOS. |
Configure the server BIOS, including setting the boot option priority and BIOS password. |
Install an OS. |
Install an OS for the server. |
