Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining EFM OAM
By maintaining EFM OAM, you can monitor the operating status of EFM OAM.
Monitoring the Operating Status of EFM OAM
In routine maintenance, you can run the following commands in any view to check the operating status of EFM OAM.
Procedure
- Run the display efm { all | interface interface-type interface-number } command to check EFM OAM configurations on interfaces.
- Run the display efm session { all | interface interface-type interface-number } command to check the EFM OAM status on interfaces.
- Run the display efm link-event local { all | interface interface-type interface-number } command to check link event statistics on a local device.
