Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining MPLS-TP OAM
This section describes how to clear Multiprotocol Label Switching Transport Profile (MPLS-TP) operation, administration and maintenance (OAM) statistics and monitor the MPLS-TP OAM operating status.
Clearing MPLS-TP OAM Statistics
This section describes how to clear Multiprotocol Label Switching Transport Profile (MPLS-TP) operation, administration and maintenance (OAM) statistics.
Monitoring the MPLS-TP OAM Operating Status
This section describes how to monitor the Multiprotocol Label Switching Transport Profile (MPLS-TP) operation, administration and maintenance (OAM) operating status.
Context
You can run the following commands in any view to check the MPLS-TP OAM operating status in routine maintenance.
Procedure
- Run the display mpls-tp oam current-alarm [ meg meg-name ] command to check alarms associated with a maintenance entity group (MEG).
- Run the display mpls-tp oam me brief command to check information about maintenance entities (MEs) in a MEG.
- Run the display mpls-tp oam meg meg-name command to check MEG information on a local device.
- Run the display mpls-tp oam meg meg-name statistic-type { lost-measure { single-ended | dual-ended } | delay-measure { one-way | two-way } } command in any view to check MPLS-TP OAM performance statistics.
