Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Y.1731 Configuration
Y.1731 is an OAM protocol at the network layer. It provides fault detection defined in IEEE 802.1ag and performance monitoring, such as frame loss measurement, frame delay measurement.
- Overview of Y.1731
Y.1731 is an operation, administration and maintenance (OAM) protocol defined by the ITU-T. It is used to implement end-to-end connectivity detection, loopback detection, and link trace Metro Ethernets (MEs). It also provides the test diagnosis and performance monitoring functions such as frame loss measurement, frame delay measurement, frame jitter measurement, and throughput measurement. - Configuring Y.1731 Functions in VLL Networking
This section describes how to configure Y.1731 functions, including single-ended frame loss measurement, dual-ended frame loss measurement, one-way frame delay measurement, and two-way frame delay measurement in VLL networking. - Configuring Y.1731 Functions in VPLS Networking
This section describes how to configure Y.1731 functions including single-ended frame loss measurement, dual-ended frame loss measurement, one-way frame delay measurement, two-way frame delay measurement in VPLS networking. - Configuring Y.1731 Functions in VLAN Networking
This section describes how to config Y.1731 functions including single-ended frame loss measurement, dual-ended frame loss measurement, one-way frame delay measurement, two-way frame delay measurement, AIS, and multicast MAC ping in VLAN networking. - Configuring Y.1731 Functions When an L2VPN Is Connected to an L3VPN
Single-ended frame loss measurement, dual-ended frame loss measurement, one-way frame delay measurement, and two-way frame delay measurement can be configured when an L2VPN is connected to an L3VPN. - Configuring Y.1731 Functions in EVPN Networking
This section describes how to configure Y.1731 functions including one-way frame delay measurement, two-way frame delay measurement, Single-ended SLM in EVPN networking. - Configuring Y.1731 Functions in BD EVPN Networking
This section describes how to configure Y.1731 functions including one-way frame delay measurement, two-way frame delay measurement, Single-ended SLM in BD EVPN networking. - Maintaining Y.1731
This section describes how to clear Y.1731 statistics by maintaining Y.1731. - Configuration Examples for Y.1731
This section provides several examples showing how to configure Y.1731 functions in different scenarios. In each configuration example, the networking requirements, configuration roadmap, and data preparation are provided.
