Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configure the CFM CCM Statistics Function
To collect statistics about CFM CCMs sent and received on a device, configure the CFM CCM statistics function.
Pre-configuration Tasks
Before configuring the CFM CCM statistics function, configure basic CFM functions.
Procedure
- Run system-view
The system view is displayed.
- Run cfm ccm statistic enable
The CFM CCM statistics function is enabled globally.
- Run commit
The configuration is committed. The device starts to collect statistics about sent and received CFM CCMs.
- (Optional) Run display ccm-send statistics
The number of CFM CCMs sent by the device after the cfm ccm statistic enable command is run is displayed.
- (Optional) Run display ccm-recv statistics
The number of CFM CCMs received by the device after the cfm ccm statistic enable command is run is displayed.
- (Optional) Run reset ccm-send statistics
The statistics about CFM CCMs sent by the device are reset.
- (Optional) Run reset ccm-recv statistics
The statistics about CFM CCMs received by the device are reset.
