Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an EFM Association to Trigger MAC Entry Deletion
An EFM association can be configured on a CE interface connected to a PE to trigger MAC entry deletion. This function allows the CE to use EFM to detect faults in VLL PW to a PE and to delete the MAC address entry for the PE to trigger PW switching.
Usage Scenario
Figure 6-24 illustrates the networking for an EFM association to trigger MAC entry deletion if link faults are detected.
- CE2 is dual-homed to PE2a and PE2b. EFM is configured to monitor the link between CE2 and PE2a and that between CE2 and PE2b. An EFM association is configured on CE2 to trigger MAC entry deletion if EFM detects link faults.
VLL FRR is configured for the link between PE1 and PE2a and that between PE1 and PE2b. An association between EFM and VLL FRR is configured on PE2a and PE2b.
