Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Examples for MPLS-TP OAM
This section provides Multiprotocol Label Switching Transport Profile (MPLS-TP) operation, administration and maintenance (OAM) configuration examples.
- Example for Configuring CC and CV for a Bidirectional LSP
This section provides an example for configuring continuity check (CC) and connectivity verification (CV) for a bidirectional label switched path (LSP). - Example for Configuring LB for a Bidirectional LSP
This section provides an example for configuring loopback (LB) for a bidirectional LSP. - Example for Configuring Frame LM for a Bidirectional LSP
This section provides an example for configuring frame loss measurement (LM) for a bidirectional label switched path (LSP). - Example for Configuring Frame DM for a Bidirectional LSP
This section provides an example for configuring frame delay measurement (DM) for a bidirectional label switched path (LSP). - Example for Configuring CC and CV for a PW
This section provides an example for configuring continuity check (CC) and connectivity verification (CV) for a pseudo wire (PW). - Example for Configuring LB for a PW
This section provides an example for configuring loopback (LB) for a pseudo wire (PW). - Example for Configuring Frame LM for a PW
This section provides an example for configuring frame loss measurement (LM) for a pseudo wire (PW). - Example for Configuring Frame DM for a PW
This section provides an example for configuring frame delay measurement (DM) for a pseudo wire (PW).
