Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MPLS OAM Configuration
This chapter describes the basic principles of Multiprotocol Label Switching (MPLS) operation, administration and maintenance (OAM). It also describes how to configure MPLS OAM to monitor label switched paths (LSPs) and pseudo wires (PWs) and provides configuration examples.
- Overview of MPLS OAM
MPLS OAM can effectively detect, identify, and locate faults at the MPLS client layer and quickly switch traffic if links or nodes fail. - MPLS OAM Licensing Requirements and Configuration Precautions
- Configuring MPLS OAM for an Associated Bidirectional LSP
This section describes how to configure MPLS OAM to check the connectivity of an associated bidirectional LSP. - Configuring MPLS OAM for a Static Bidirectional Co-routed LSP
This section describes how to configure MPLS OAM to check the connectivity of a static bidirectional co-routed LSP. - Configuring MPLS OAM for a PW
This section describes how to configure MPLS OAM to check the connectivity of a PW. - Maintaining MPLS OAM
This section describes how to clear Multiprotocol Label Switching (MPLS) operation, administration and maintenance (OAM) statistics and monitor the MPLS OAM operating status. - Configuration Examples for MPLS OAM
This section provides configuration examples for MPLS OAM for a static associated bidirectional LSP, static bidirectional co-routed LSP, and PW.
