Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Securing a Unit
- Determine the installation position on the ground based on the hole dimensions, and move the unit to the installation position using a pallet truck.Figure 4-12 Hole dimensions on the floor (unit: mm)
If you need to secure the unit to a base, see Base Dimensions. Secure it to the base using four M12x45 bolt assemblies and install anchor baffle plates.
- Secure the unit.
- Secure the unit to the ground or base using four M12 bolts.
- Secure the anchor baffle plate to the fan side using eight M5x10 tapping screws.
- If the air duct is not connected, seal the fan side.
- Obtain the anchor baffle plates according to the packing list.
Figure 4-13 Securing the unit to the floorFigure 4-14 Securing the unit to a baseAfter the unit is secured, seal the base on the fan side.
