Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Commission a Component?
Context
- On the diagnostic mode screen, you can turn on or off components, and control their output ratio.
- If you need to manually turn on or off system components in diagnostic mode, ensure that the smart cooling product is started before operation.
- Take commissioning the indoor fan as an example.
Procedure
- Choose .
The screen for entering the diagnostic mode:
- Components are interlocked for protection. Therefore, buttons for enabling or disabling certain components may be gray, indicating that operations on the components are not allowed.
- To ensure system security, a component may not promptly respond to operations performed on this screen.
- To exit the diagnostic mode, tap
on the status bar.
- The system automatically exits diagnostic mode when it reaches the maximum diagnostic mode duration.
- Set Indoor fan to 50%.
For safe system operation, when smart cooling product components are turned on, the following coupling relationships are presented:
- When the electric heater is turned on, the indoor fans will turn on automatically.
- When the electrode humidifier is turned on, the indoor fans and inlet water solenoid valve will start automatically.
- When the input value of the indoor fan is less than the minimum speed, the indoor fan will run at the minimum speed.
- Check that the indoor fans run properly, and no alarm generates.
- Choose or tap
to exit the diagnostic mode.
on the status bar.