Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CAN Teamwork + FE Monitoring
- Connect teamwork and monitoring communications cables.
Networking
CAN Teamwork
FE Monitoring
Protocol
CAN
Modbus-TCP/SNMP
Description
One teamwork network supports a maximum of 32 units. On the Teamwork Settings screen of the display modules of the first and last units, set Enable teamwork CAN resistor to Yes.
-
If the Modbus-TCP/SNMP protocol is used, customers can purchase the NetEco (a LAN switch is required) or a third-party NMS as the monitoring system.
Figure 4-33 Connecting communications cables
