Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Preparing a Network Cable
- Crimp a network cable.Figure 4-27 Teamwork communications cable and FE monitoring communications cable
(1) Orange-white
(2) Orange
(3) Green-white
(4) Blue
(5) Blue-white
(6) Green
(7) Brown-white
(8) Brown
Figure 4-28 RS485 monitoring communications cable(4) Blue
(5) Blue-white
Crimp only the core wire 4 (blue) and core wires 5 (blue-white) on the RJ45 connector of the RS485 monitoring communications cable. Do not crimp core wires 1, 2, 3, 6, 7, and 8. Otherwise, communication interference may occur.
