Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Unpacking and Checking
Context
Move the unit closest to the installation position before unpacking it to facilitate movement and avoid damage.![]()
During movement, do not tilt it for 90°.
Procedure
- Check that the outer package of the unit is intact. If any damage is found, notify the carrier immediately.
- Check whether the exterior of the unit is in good condition and free of collision marks or scratches. If any damage is found, notify the carrier immediately.
- Do not remove the plastic packing materials before connecting pipes and cables to prevent dust and other foreign matter from entering the unit.
- After pipes and cables are connected, take dustproof and anti-condensation measures in a timely manner based on site requirements.
- Check the type and quantity of fittings against the packing list. If some fittings are missing or do not comply with the models in the packing list, record the information and contact the supplier immediately.
After the check is complete, keep the accessories properly.