(Optional) Setting WIFI Parameters
Prerequisites
After connecting the WiFi module of the USB interface to the USB port of the smart cooling product main control module, WIFI Settings is enabled to be set.
Procedure
- On the home screen, choose Figure 5-13 WIFI Setting
- Set parameters.
Parameter
Description
WiFi SSID
Set WiFi SSID based on the actual configuration; WiFi SSID is the name used for the WiFi hotspot over which a mobile phone can connect to the smart cooling product.
WiFi password
Enter the WiFi password when you use a mobile phone to connect to the WiFi. The WiFi has no preset password. When you enable the WiFi function for the first time, you need to set a password.
Enable WiFi
Enables the WiFi function of the smart cooling product. The default status is Disable.
WiFi group sharing enable
When a mobile phone is connected to the WiFi of the smart cooling product, it can access the units in the same FE cascading network.
- Tap Submit.
