HUAWEI IdeaHub Pro, IdeaHub S, and IdeaHub Enterprise 21.0 MIB Reference

Rate and give feedback:

Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).

VIEWPOINT-MIB

Function Overview

The VIEWPOINT-MIB defined under .1.3.6.1.4.1.2011.2.14 is mainly used to query the network device status and functions. The MIB supports query on the gatekeeper (GK) or Simple Internet Protocol (SIP) registration status, but does not support function settings.

The root node of the VIEWPOINT-MIB is:

iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).huawei(2011).products(2).viewpoint(14)

At present, the MIB supports the following single objects:

vctGkRegisterStatus, vctSipRegisterStatus, vctMicStatus, vctCameraStatus, vctAutoAnswerStatus, vctNtpStatus, vctNetJitteryStatus and vctNetLostDataStatus

Description of Single Objects

vctGkRegisterStatus

The OID is .1.3.6.1.4.1.2011.2.14.101.1.1.22.1, as shown in Table 2-1.

Table 2-1 vctGkRegisterStatus

Node	Data Type	Maximum Access Rights	Description	Implementation Specification
vctGkRegisterStatus	Unsigned32	read-only	GK registration status.	Implement according to definitions in the MIB file.

vctSipRegisterStatus

The OID is .1.3.6.1.4.1.2011.2.14.101.1.1.22.2, as shown in Table 2-2.

Table 2-2 vctSipRegisterStatus

Node	Data Type	Maximum Access Rights	Description	Implementation Specification
vctSipRegisterStatus	Unsigned32	read-only	SIP registration status.	Implement according to definitions in the MIB file.

vctMicStatus

The OID is .1.3.6.1.4.1.2011.2.14.101.1.1.22.3, as shown in Table 2-3.

Table 2-3 vctMicStatus

Node	Data Type	Maximum Access Rights	Description	Implementation Specification
vctMicStatus	Unsigned32	read-only	Microphone connection status.	Implement according to definitions in the MIB file.

vctAutoAnswerStatus

The OID is .1.3.6.1.4.1.2011.2.14.101.1.1.22.6, as shown in Table 2-4.

Table 2-4 vctAutoAnswerStatus

Node	Data Type	Maximum Access Rights	Description	Implementation Specification
vctAutoAnswerStatus	Unsigned32	read-only	Automatic answer status.	Implement according to definitions in the MIB file.

vctCameraStatus

The OID is .1.3.6.1.4.1.2011.2.14.101.1.1.22.4, as shown in Table 2-5.

Table 2-5 vctCameraStatus

Node	Data Type	Maximum Access Rights	Description	Implementation Specification
vctCameraStatus	Unsigned32	read-only	External camera connection status.	Implement according to definitions in the MIB file.

vctNtpStatus

The OID is .1.3.6.1.4.1.2011.2.14.101.1.1.22.7, as shown in Table 2-6.

Table 2-6 vctNtpStatus

Node	Data Type	Maximum Access Rights	Description	Implementation Specification
vctNtpStatus	Unsigned32	read-only	Network Time Protocol (NTP) time synchronization status.	Implement according to definitions in the MIB file.

vctNetJitteryStatus

The OID is .1.3.6.1.4.1.2011.2.14.101.1.1.22.8, as shown in Table 2-7.

Table 2-7 vctNetJitteryStatus

Node	Data Type	Maximum Access Rights	Description	Implementation Specification
vctNetJitteryStatus	Unsigned32	read-only	Network jitter status during a call.	Implement according to definitions in the MIB file.

vctNetLostDataStatus

The OID is .1.3.6.1.4.1.2011.2.14.101.1.1.22.9, as shown in Table 2-8.

Table 2-8 vctNetLostDataStatus

Node	Data Type	Maximum Access Rights	Description	Implementation Specification
vctNetLostDataStatus	Unsigned32	read-only	Network packet loss status during a call.	Implement according to definitions in the MIB file.

Description of Alarm Objects

vctNotifyInitResult

The OID is .1.3.6.1.4.1.2011.2.14.101.1.3.1, as shown in Table 2-9.

Table 2-9 vctNotifyInitResult

Node	Bound Variable	Description	Implementation Specification
vctNotifyInitResult	vctInitType vctInitResultBoardSlot vctInitResultIndex vctInitResultDesc	Initialization result notification released after the device is started and initialized.	Implement according to definitions in the MIB file.

vctNotifyReboot

The OID is .1.3.6.1.4.1.2011.2.14.101.1.3.2, as shown in Table 2-10.

Table 2-10 vctNotifyReboot

Node	Bound Variable	Description	Implementation Specification
vctNotifyReboot	vctRbtType vctCnslIP	HUAWEI IdeaHub restart notification.	Implement according to definitions in the MIB file.

vctCPUUnconvent

The OID is .1.3.6.1.4.1.2011.2.14.101.1.3.3, as shown in Table 2-11.

Table 2-11 vctCPUUnconvent

Node	Bound Variable	Description	Implementation Specification
vctCPUUnconvent	vctCPUId	CPU exception notification.	Implement according to definitions in the MIB file.

vctOverTemp

The OID is .1.3.6.1.4.1.2011.2.14.101.1.3.4, as shown in Table 2-12.

Table 2-12 vctBackUpgradReq

Node	Bound Variable	Description	Implementation Specification
vctOverTemp	vctTemperature	Notification released when the device temperature exceeds a certain threshold.	Implement according to definitions in the MIB file.

vctBackUpgradReq

The OID is .1.3.6.1.4.1.2011.2.14.101.1.3.5, as shown in Table 2-13.

Table 2-13 vctBackUpgradReq

Node	Bound Variable	Description	Implementation Specification
vctBackUpgradReq	vctBcksnlIp	Notification released when the device starts upgrade.	Implement according to definitions in the MIB file.

vctBackUpgradRes

The OID is .1.3.6.1.4.1.2011.2.14.101.1.3.6, as shown in Table 2-14.

Table 2-14 vctBackUpgradRes

Node	Bound Variable	Description	Implementation Specification
vctBackUpgradRes	vctupgradrslt vctUpgradeFltRsn	Device upgrade result notification.	Implement according to definitions in the MIB file.

vctNotifyRegistStatus

The OID is .1.3.6.1.4.1.2011.2.14.101.1.3.8, as shown in Table 2-15.

Table 2-15 vctNotifyRegistStatus

Node	Bound Variable	Description	Implementation Specification
vctNotifyRegistStatus	vctRegistType vctRegistResult vctRegistResultIndex vctRegistResultDesc	GK or SIP registration status change notification.	Implement according to definitions in the MIB file.

vctNotifyAnthError

The OID is 1.3.6.1.6.3.1.1.5.5, as shown in Table 2-16.

Table 2-16 vctNotifyAnthError

Node	Bound Variable	Description	Implementation Specification
vctNotifyAnthError	vctAnthErrorType vctAnthErrorIndex	Notification released when web interface login fails because of an incorrect user name or password.	Implement according to definitions in the MIB file.

vctNotifyDataLost

The OID is .1.3.6.1.4.1.2011.2.14.101.1.3.10, as shown in Table 2-17.

Table 2-17 vctNotifyDataLost

Node	Bound Variable	Description	Implementation Specification
vctNotifyDataLost	vctDataLostType vctDataLostIndex vctDataLostTxRx vctDataLostNum	Notification released when packets are lost during a call.	Implement according to definitions in the MIB file.

vctNotifyCfgError

The OID is .1.3.6.1.4.1.2011.2.14.101.1.3.11, as shown in Table 2-18.

Table 2-18 vctNotifyCfgError

Node	Bound Variable	Description	Implementation Specification
vctNotifyCfgError	vctCfgErrorType vctCfgErrorIndex	Notification released when a configuration parameter error is detected during startup check.	Implement according to definitions in the MIB file.

vctNotifyIpChange

The OID is .1.3.6.1.4.1.2011.2.14.101.1.3.12, as shown in Table 2-19.

Table 2-19 vctNotifyIpChange

Node	Bound Variable	Description	Implementation Specification
vctNotifyIpChange	vctIpChangeType vctIpChangeIndex vctIpAddr vctmacAddr	Device IP address change notification.	Implement according to definitions in the MIB file.

vctNotifyTimeServerSyn

The OID is .1.3.6.1.4.1.2011.2.14.101.1.3.13, as shown in Table 2-20.

Table 2-20 vctNotifyTimeServerSyn

Node	Bound Variable	Description	Implementation Specification
vctNotifyTimeServerSyn	vctTimeServerSynType vctTimeServerSynResult vctTimeServerSynIndex	Notification released when the device successfully synchronizes the NTP server time.	Implement according to definitions in the MIB file.

vctNotifyJitter

The OID is .1.3.6.1.4.1.2011.2.14.101.1.3.14, as shown in Table 2-21.

Table 2-21 vctNotifyInitResult

Node	Bound Variable	Description	Implementation Specification
vctNotifyInitResult	vctJitterType vctJitterIndex vctJitterTxRx	Notification released when network jitters exceeds a certain threshold.	Implement according to definitions in the MIB file.

vctNotifyMainCameraOperation

The OID is .1.3.6.1.4.1.2011.2.14.101.1.3.15, as shown in Table 2-22.

Table 2-22 vctNotifyMainCameraOperation

Node	Bound Variable	Description	Implementation Specification
vctNotifyMainCameraOperation	vctMainCameraOperaType vctMainCameraOperaResult vctMainCameraOperaIndex	Camera connection status change notification	Implement according to definitions in the MIB file.

vctNotifyMainMicOperation

The OID is .1.3.6.1.4.1.2011.2.14.101.1.3.16, as shown in Table 2-23.

Table 2-23 vctNotifyMainMicOperation

Node	Bound Variable	Description	Implementation Specification
vctNotifyMainMicOperation	vctMainMicOperaType vctMainMicOperaResult vctMainMicOperaIndex	Microphone connection status change notification	Implement according to definitions in the MIB file.

vctNotifyGKRegStatus

The OID is .1.3.6.1.4.1.2011.2.14.101.1.3.17, as shown in Table 2-24.

Table 2-24 vctNotifyGKRegStatus

Node	Bound Variable	Description	Implementation Specification
vctNotifyGKRegStatus	vctGKAddrTypevctMainMicOperaResult vctGKAddr vctGKRegStatus vctGKRegFailedReason	GK registration status change notification	Implement according to definitions in the MIB file.

vctNotifySIPServerRegStatus

The OID is .1.3.6.1.4.1.2011.2.14.101.1.3.18, as shown in Table 2-25.

Table 2-25 vctNotifySIPServerRegStatus

Node	Bound Variable	Description	Implementation Specification
vctNotifySIPServerRegStatus	vctSIPServerAddrType vctSIPServerAddr vctSIPServerRegStatus vctSIPServerRegFailedReason	SIP registration status change notification	Implement according to definitions in the MIB file.

vctNotifyDevInfo

The OID is .1.3.6.1.4.1.2011.2.14.101.1.3.19, as shown in Table 2-26.

Table 2-26 vctNotifyDevInfo

Node	Bound Variable	Description	Implementation Specification
vctNotifyDevInfo	vctSerialNoInfo vctMacAddrInfo vctIpAddrInfo	Device information notification	Implement according to definitions in the MIB file.

vctNotifyLatencyExcessive

The OID is .1.3.6.1.4.1.2011.2.14.101.1.3.20, as shown in Table 2-27.

Table 2-27 vctNotifyLatencyExcessive

Node	Bound Variable	Description	Implementation Specification
vctNotifyLatencyExcessive	None	Notification of excessive average latency	Implement according to definitions in the MIB file.

vctNotifyTrapAddrChange

The OID is .1.3.6.1.4.1.2011.2.14.101.1.3.22, as shown in Table 2-28.

Table 2-28 vctNotifyTrapAddrChange

Node	Bound Variable	Description	Implementation Specification
vctNotifyTrapAddrChange	None	Notification released when an SNMP trap address configuration parameter changes.	Implement according to definitions in the MIB file.

vctNotifyLowSound

The OID is .1.3.6.1.4.1.2011.2.14.101.1.3.23, as shown in Table 2-29.

Table 2-29 vctNotifyLowSound

Node	Bound Variable	Description	Implementation Specification
vctNotifyLowSound	vctType vctResult vctSiteName vctLowSoundIndex	Notification released when microphone volume is too low or recovers to normal volume.	Implement according to definitions in the MIB file.

vctNotifyInCamAction

The OID is .1.3.6.1.4.1.2011.2.14.101.1.3.24, as shown in Table 2-30.

Table 2-30 vctNotifyInCamAction

Node	Bound Variable	Description	Implementation Specification
vctNotifyInCamAction	vctInCamType vctWarnType	Notification released when the signal, fan, temperature, or chip of the built-in camera is abnormal or when the main video source camera is disconnected.	Implement according to definitions in the MIB file.

Download

Updated: 2020-09-02

Document ID: EDOC1100149415

Downloads: 26

Average rating:

This Document Applies to these Products

Reminder

Enterprise

Corporate

Consumer

Carrier

Africa

Latin America

Middle East

Asia Pacific

North America

Europe