- About This Document
Safety Information
Overview
Device Description
ECC800-Pro
Southbound Device Introduction
- UIM20A Expansion Module
- Rack Environment Unit
- Smart ETH Gateway
- Access Control System
- Smart Module Actuator
- AC Actuator
- Skylight Actuator
- Multi-Functional Sensor
- Smoke Sensor
- Temperature Sensor
- Cabinet Temperature Sensor
- Alarm Beacon
- (Optional) Smart U Space Manager
- eLight Actuator
- Water Sensor
- WiFi Module
- ETH Converter
- PAD
- T/H Sensor
- Infrared Remote Control Module
- Intelligent Battery Monitoring System
UI Description
Power-On Commissioning
- Preparations and WebUI Login
- Performing Startup Password Authentication (for FusionModule800)
- Commissioning Configuration Wizard
- Configuring Event Notification
- Commissioning the Smart Busbar
- Commissioning the eLight
- Commissioning the eLight (for FusionModule800)
- Commissioning the PDU2000 (for FusionModule800)
- Commissioning Cabinet Electronic Clasp Lock (for FusionModule800)
Feature Description
- Setting Device Performance Parameters
- Setting ECC800-Pro Cascading
- Commissioning a UIM20A Expansion Module
Access Management
Video Management
Linkage Control
Infrared Remote Control Module Control and Management
PUE Configuration
Battery Management
Asset Management
Power Management
Cooling Capacity Management
Facial Recognition
Remote Management
- Setting Other Parameters
Maintenance
FAQ
WebUI Operations
- How Can I View Version Information?
- How Can I Upgrade the ECC800-Pro Software Version?
- How Can I Set the Date and Time?
- How Can I Check the System Type and Set the Smart Module Name?
- How Can I Manage WebUI Users?
- How Do I Create a Smart Module Plan View?
- How Can I Set and Add Devices?
- How Can I Restore Factory Settings?
- How Can I Install a Network Security Certificate?
- How Can I Install a Device Access Certificate?
- How Can I Change the ECC800-Pro IP Address on the WebUI?
- How Can I Configure ECC800-Pro Alarm Parameters?
- How Can I View Real-Time Monitoring Data, Active Alarms, Historical Alarms, Access Event, and Operation Logs?
- How Can I Handle Alarms?
- How Can I View Performance Data?
- How Can I Change a Signal Name?
- How Can I Export Historical Data and Device Data?
- How Can I Export or Import a Configuration File?
- How Can I Export Fault Information?
- How Can I Synchronize Device Parameters?
- What Should I Do If the ECC800-Pro WebUI Display Language Changes from Chinese to English During Use?
- What Should I Do If the ECC800-Pro Fails to Communicate with the UPS5000-E?
- What Should I Do if I Forget the ECC800 IP Address?
- What Should I Do If a Message Indicating Unauthorized Fingerprint Is Displayed During Fingerprint Scanning on the Access Control Device (Fingerprint Has Been Recorded)?
- How Can I Rectify Camera Access Restriction?
- How Can I Add the Devices Accessed Through a Smart ETH Gateway to the ECC800-Pro WebUI (Modbus-TCP)?
- How Can I Add the Devices Accessed Through a Smart ETH Gateway to the ECC800-Pro WebUI (Modbus-MAC)?
- How Can I Add Devices Accessed Through the ETH Converter to the ECC800-Pro WebUI?
- How Can I Add Devices Accessed Through the ECC800-Pro COM Port to the ECC800-Pro WebUI?
- How Can I Add Devices Accessed Through the ECC800-Pro AI/DI Port to the ECC800-Pro WebUI?
- How Can I Add an RS485 Device Connected to the ECC800-Pro Through a UIM20A?
- How Can I Add a Dry Contact Device Connected to the ECC800-Pro Through a UIM20A Expansion Module?
- How Can I Open Doors Remotely over the ECC800-Pro WebUI?
- How Can I Turn On or Off Aisle Lights in the Smart Module over the ECC800-Pro WebUI?
- How Can I Open Skylights Remotely over the ECC800-Pro WebUI?
- How Can I Turn On or Off Smart Cooling Products over the ECC800-Pro WebUI?
- How Can I Open the Cabinet Electronic Lock over the ECC800-Pro WebUI?
- How Can I Link the Smoke Alarm with the Alarm Beacon over the ECC800-Pro WebUI?
- How Can I Link the AI/DI Alarm with the Alarm Beacon over the ECC800-Pro WebUI?
- How Can I Modify Device Names over the ECC800-Pro WebUI?
APP Operations
- How Can I Connect to a WiFi Network?
- How Can I Prepare and Log In to the App?
- How Can I Ensure that Device Positions in the Plan View Are Consistent with Actual Positions?
- How Can I View Real-time Data?
- How Can I Export and Import Data?
- How Can I Synchronize Device Parameters?
- How Can I Handle App Login Failure?
PLC Function
- Acronyms and Abbreviations