Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying the Temperature of All Chips on a Card
Function
The npu-smi info -t temp -i id command is used to query the temperature of all chips.
Syntax
npu-smi info -t temp -i id
Parameters
Parameter |
Description |
|---|---|
id |
NPU ID. |
Example
npu-smi info -t temp -i 1
NPU ID : 1
Chip Count : 1
Chip ID : 0
NPU Temperature (C) : 36
