Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying and Setting the SNMP Trap Mode (trap -d mode)
Function
The trap -d mode command enables you to query and set the SNMP trap mode.
Format
ipmcget -t trap -d mode
ipmcset -t trap -d mode -v <option>
Parameters
Parameter |
Description |
Value |
|---|---|---|
option |
Specifies the SNMP trap mode. |
|
Usage Guidelines
Precise Alarm (recommended) provides more accurate information than OID and Event Code. For details, see iBMC Intelligent Management System SNMP API Description.
Example
# Set the SNMP trap mode to Event Code.
iBMC:/->ipmcset -t trap -d mode -v 0
Set trap mode Event Code success.
# Query the current SNMP trap mode.
iBMC:/->ipmcget -t trap -d mode
Trap mode: Event Code