Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Active iBMC Port (activeport)
Function
The activeport command is used to set the active iBMC management network port.
Format
ipmcset -d activeport -v <option> [portid]
Parameters
Parameter |
Description |
Value |
|---|---|---|
option |
Port type |
NOTE:
The value range varies with the server model. |
portid |
Port number |
The value range is 0 and 1 for a dual-port NIC, and 0 to 3 for a four-port NIC. |
Usage Guidelines
You do not need to specify portid for a dedicated iBMC network port.
Example
# Set the dedicated network port as the iBMC port.
iBMC:/->ipmcset -d activeport -v 0 Set active port successfully.
# Query information about the iBMC port.
iBMC:/->ipmcget -d ipinfo EthGroup ID : 1 Net Mode : Manual Net Type : Dedicated IPv4 Information : IP Mode : dhcp IP Address : 192.168.0.12 Subnet Mask : 255.255.0.0 Default Gateway : 192.168.0.25 Backup IP Address : 192.168.0.144 (Activated) Backup Subnet Mask : 255.255.255.0 (Activated) MAC Address : IPv6 Information : IPv6 Mode : static IPv6 Address : fc00::65 Default Gateway IPv6 : fc00::1 Link-Local Address : fe80::218:e1ff:fec5:d866/64 VLAN Information : VLAN State : disabled VLAN ID : 1