Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying the Available Network Port (ethport)
Function
The ethport command is used to query the information of the available network port.
Format
ipmcget -d ethport
Parameters
None
Usage Guidelines
None
Example
# Query the available network port.
iBMC:/->ipmcget -d ethport
Type | Name | Port ID | Link Status
Dedicated | eth2 | na | Link_Up
LOM | Port1 | 1 | Link_Down
LOM | Port2 | 2 | Link_Down
LOM | Port3 | 3 | Link_Down
LOM | Port4 | 4 | Link_Down