Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the UID Indicator (identify)
Function
The identify command is used to set the UID indicator.
Format
ipmcset -d identify [ -v {time | force }]
Parameters
Parameter |
Description |
Value |
|---|---|---|
time |
Specifies the time (in seconds) for which the UID indicator blinks. |
Value range: 0 to 255 The value 0 indicates that the UID indicator is off. |
force |
Forces the UID indicator to be steady on. |
- |
Usage Guidelines
If time is not set, the UID indicator blinks for 15 seconds by default.
Example
# Turn on the UID indicator permanently.
iBMC:/->ipmcset -d identify -v force Identify UID led successfully.