Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the IPv4 Gateway Address of the iBMC (gateway)
Function
The gateway command is used to set the IPv4 gateway address of the iBMC.
Format
ipmcset -d gateway -v <gateway>
Parameters
Parameter |
Description |
Value |
|---|---|---|
gateway |
Indicates the IPv4 gateway address of the iBMC. |
An IPv4 in the xxx.xxx.xxx.xxx format. |
Usage Guidelines
After the gateway address is changed, the new gateway address takes effect immediately.
Example
# Set the gateway address of the iBMC to 192.168.0.1.
iBMC:/->ipmcset -d gateway -v 192.168.0.1 Set GATEWAY successfully.
# Query the new gateway address of the iBMC.
iBMC:/->ipmcget -d ipinfo EthGroup ID : 1 Net Mode : Manual Net Type : Dedicated IPv4 Information : IP Mode : static IP Address : 192.168.0.25 Subnet Mask : 255.255.255.0 Default Gateway : 192.168.0.1 Backup IP Address : 192.168.0.144 (Activated) Backup Subnet Mask : 255.255.255.0 (Activated) MAC Address : IPv6 Information : IPv6 Mode : dhcp IPv6 Address : Default Gateway IPv6 : Link-Local Address : fe80::218:e1ff:fec5:d866/64 VLAN Information : VLAN State : disabled VLAN ID : 1