Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Server Commands
- Querying and Setting the Boot Device (bootdevice)
- Setting the Server Reset Mode (frucontrol)
- Querying and Setting the Server Power State (powerstate)
- Querying and Setting the Server Power-Off Timeout Period (shutdowntimeout)
- Querying the MAC Address of the Network Interface on the Main Board (macaddr)
- Querying the Available Network Port (ethport)
- Clearing the BIOS Flash (clearcmos)
- Querying RAID Controller Card Information (i
- iBMCQuerying Logical Disk Information (ldinfo)
- Querying Physical Disk Information (pdinfo)
- Querying Disk Array Information (arrayinfo)
- Creating a Logical Drive (createld)
- iBMCAdding a Logical Drive (addld)
- Deleting a Logical Drive (deleteld)
- Modifying Logical Drive Properties (ldconfig)
- Modifying RAID Controller Properties (ctrlconfig)
- Modifying Physical Drive Properties (pdconfig)
- Querying and Setting the NPU Chip Working Mode (npuworkmode)