Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
iBMC Commands
- Querying iBMC IP Information (ipinfo)
- Setting iBMC IPv4 Address (ipaddr)
- Setting the Backup IPv4 Information for the iBMC Management Network Port (backupipaddr)
- Setting the IPv4 Mode of the iBMC (ipmode)
- Setting the IPv4 Gateway Address of the iBMC (gateway)
- Setting iBMC IPv6 Address (ipaddr6)
- Setting the IPv6 Mode of the iBMC (ipmode6)
- Setting the IPv6 Gateway Address of the iBMC (gateway6)
- Setting the Network Port Mode (netmode)
- Setting the Active iBMC Port (activeport)
- Setting a VLAN ID for a Network Port (vlan)
- Querying and Redirecting the Serial Port (serialdir)
- Restarting the iBMC (reset)
- Upgrading the Firmware (upgrade)
- Capturing the Screen (printscreen)
- Rolling Back the iBMC Software (rollback)
- Querying the Result of Rolling Back the iBMC Software (rollbackstatus)
- Setting Service State (service -d state)
- Setting the Service Port Number (service -d port)
- Querying Service Information (service -d list)
- Setting the Enablement Status of the Login Security Message (securitybanner -d state)
- Customizing the Login Security Message (securitybanner -d content)
- Querying the Login Security Message (securitybanner -d info)
- Importing an SSL Certificate (certificate -d import)
- Querying SSL Certificate Information (certificate -d info)
- Exporting the Configuration File (config -d export)
- Importing the Configuration File (config -d import)
- Importing the CRL File (crl)
- Mounting a File to the Virtual CD-ROM Drive (vmm -d connect)
- Disconnecting the Virtual CD-ROM Drive (vmm -d disconnect)
- Querying Virtual Media Information (vmm -d info)
- Restoring the Default Settings for the FPGA Card Golden Firmware (fpgagoldenfwrestore)