Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying and Setting the Server Power State (powerstate)
Function
The powerstate command is used to query and set the power state of the server.
Format
ipmcget [-t fru0] -d powerstate
ipmcset [-t fru0] -d powerstate -v <option>
Parameters
Parameter |
Description |
Value |
|---|---|---|
option |
Specifies the operation to be performed on the server. |
|
Usage Guidelines
The power-off command is invalid for a server in power-off state.
Example
# Power on the server.
iBMC:/->ipmcset -d powerstate -v 1
WARNING: The operation may have many adverse effects
Do you want to continue?[Y/N]:y
Control fru0 power on successfully.
# Query the power state of the server.
iBMC:/->ipmcget -d powerstate
Power state : On
Hotswap state : M4