Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying SNMP Trap Destination Information (trap -d trapiteminfo)
Function
The trap -d trapiteminfo command is used to query SNMP trap destination information, which includes the SNMP trap state, IP address, and port number.
Format
ipmcget -t trap -d trapiteminfo
Parameters
None
Usage Guidelines
None
Example
# Query SNMP trap destination information.
iBMC:/->ipmcget -t trap -d trapiteminfo
TrapItem Num | state | port | alert address
1 | enabled | 1024 |
2 | disabled | 162 |
3 | disabled | 162 |
4 | disabled | 162 |