Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Rolling Back the iBMC Software (rollback)
Function
The rollback command is used to roll back the firmware of the active iBMC from the current image to an earlier version available.
Format
ipmcset -d rollback
Parameters
None
Usage Guidelines
After the command is executed, the original primary partition image changes to the backup state and synchronizes data with the current primary partition image, and the original backup one automatically changes to the available state.
Example
# Roll back the iBMC software.
iBMC:/->ipmcset -d rollback WARNING: The operation may have many adverse effects Do you want to continue?[Y/N]:y Set rollback successfully, system will reboot soon!