Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Method for Obtaining NTP Information (ntp -d mode)
Function
The ntp -d mode command is used to set how to obtain NTP information.
Format
ipmcset -t ntp -d mode -v mode
Parameters
Parameter |
Description |
Value |
|---|---|---|
mode |
Specifies how to obtain NTP information. |
|
Usage Guidelines
If mode is DHCPv4, you do not need to set the time zone data.
Example
# Enable NTP information to be manually set.
iBMC:/->ipmcset -t ntp -d mode -v manual
Set NTP mode (manual) successfully.
# Query NTP information.
iBMC:/->ipmcget -d ntpinfo
Status : enabled
Mode : manual
Preferred Server : dhcp1.com
Alternative Server : fc00::1234
Extra Server : 192.168.2.2
Synchronize : successful
Auth Enable : enabled
Group Key : imported