Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the IPv6 Mode of the iBMC (ipmode6)
Function
The ipmode6 command is used to specify how the iBMC IPv6 address is allocated.
Format
ipmcset -d ipmode6 -v <dhcp | static>
Parameters
Parameter |
Description |
Value |
|---|---|---|
dhcp |
The DHCP server dynamically allocates an IP address to the iBMC. |
- |
static |
The iBMC uses a static IP address. |
- |
Usage Guidelines
After the IPv6 mode is changed, the new configuration takes effect immediately.
Example
# Enable the iBMC to use an IPv6 address dynamically allocated by the DHCP server.
iBMC:/->ipmcset -d ipmode6 -v dhcp Set dhcp mode successfully.
# Query the iBMC IP address.
iBMC:/->ipmcget -d ipinfo EthGroup ID : 1 Net Mode : Manual Net Type : Dedicated IPv4 Information : IP Mode : dhcp IP Address : 192.168.0.12 Subnet Mask : 255.255.0.0 Default Gateway : 192.168.0.25 Backup IP Address : 192.168.0.144 (Activated) Backup Subnet Mask : 255.255.255.0 (Activated) MAC Address : IPv6 Information : IPv6 Mode : dhcp IPv6 Address : Default Gateway IPv6 : Link-Local Address : fe80::218:e1ff:fec5:d866/64 VLAN Information : VLAN State : disabled VLAN ID : 1