Querying iBMC IP Information (ipinfo)

Function

The ipinfo command is used to query the IP address of the iBMC management network port.

Format

ipmcget -d ipinfo

Parameters

None

Usage Guidelines

None

Example

# Query the iBMC IP address.

iBMC:/->ipmcget -d ipinfo
EthGroup ID           :  1
Net Mode              :  Adaptive
Net Type              :  Dedicated
IPv4 Information      :
IP Mode               :  static
IP Address            :  192.168.3.140
Subnet Mask           :  255.255.0.0
Default Gateway       :  192.168.0.1
Backup IP Address     :  192.168.0.33 (Deactivated)
Backup Subnet Mask    :  255.255.0.0 (Deactivated)
MAC Address           :  
IPv6 Information      :
IPv6 Mode             :  static
IPv6 Address 1        :  fc00:225::3140/64
Default Gateway IPv6  :  fc00:225::1
Link-Local Address    :  fe80::1a3d:5eff:febe:bc35/64
IPv6 Address 2        :  fc00:225::1a3d:5eff:febe:bc35/64
VLAN Information      :
VLAN State            :  disabled

In the values of Backup IP Address and Backup Subnet Mask, Activated indicates that the IP address and subnet mask are activated, and Deactivated indicates that the IP address and subnet mask are not activated.