Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying and Setting the SNMP Trap Alarm Severities (trap -d severity)
Function
The trap -d severity command is used to query and set the severities of alarms to be sent through SNMP trap messages.
Format
ipmcget -t trap -d severity
ipmcset -t trap -d severity -v <level>
Parameters
Parameter |
Description |
Value |
|---|---|---|
level |
Specifies the severities of alarms to be sent through SNMP trap messages. |
|
Usage Guidelines
Multiple severities can be specified, for example, ipmcset -t trap -d severity -v normal minor.
Example
# Enable minor alarms to be sent through SNMP trap messages.
iBMC:/->ipmcset -t trap -d severity -v minor
Set trap severity successfully.
# Query the severity of the alarms sent through SNMP trap messages.
iBMC:/->ipmcget -t trap -d severity
Trap severity : minor