Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying and Setting the In-Band User Management Status (user -d usermgmtbyhost)
Function
The user -d usermgmtbyhost command is used to enable or disable in-band user management or query the in-band user management settings.
Format
ipmcset -t user -d usermgmtbyhost -v <option>
ipmcget -t user -d usermgmtbyhost
Parameters
Parameter |
Description |
Value |
|---|---|---|
<option> |
Status of in-band user management. |
|
Usage Guidelines
If in-band user management is disabled, user management cannot be performed through the BIOS or by using the IPMI commands sent in in-band mode.
Example
# Disable in-band user management.
iBMC:/->ipmcset -t user -d usermgmtbyhost -v 0
The BMC user management function is successfully disabled on the host side.
# Query the in-band user management settings.
iBMC:/->ipmcget -t user -d usermgmtbyhost
Disable