Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Network Port Mode (netmode)
Function
The netmode command is used to set how the iBMC network port is specified.
Format
ipmcset -d netmode -v <option>
Parameters
Parameter |
Description |
Value |
|---|---|---|
option |
Indicates how the iBMC network port is specified. |
Default value: 1 |
Usage Guidelines
- If option is 1, you need to manually set the iBMC management network port.
- If option is 2, you need to specify the network ports for auto-negotiation. The dedicated iBMC port takes precedence over other network ports specified. If the dedicated iBMC network port is unavailable, a network port will be selected from the other network ports available.
Example
# Enable the iBMC network port to be manually specified.
iBMC:/->ipmcset -d netmode -v 1 Set net mode Manual successfully.
# Query the iBMC network port mode.
iBMC:/->ipmcget -d ipinfo EthGroup ID : 1 Net Mode : Manual Net Type : Dedicated IPv4 Information : IP Mode : dhcp IP Address : 192.168.0.12 Subnet Mask : 255.255.0.0 Default Gateway : 192.168.0.25 Backup IP Address : 192.168.0.144 (Activated) Backup Subnet Mask : 255.255.255.0 (Activated) MAC Address : IPv6 Information : IPv6 Mode : static IPv6 Address : fc00::65 Default Gateway IPv6 : fc00::1 Link-Local Address : fe80::218:e1ff:fec5:d866/64 VLAN Information : VLAN State : disabled VLAN ID : 1