Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying NTP Information (ntpinfo)
Function
The ntpinfo command is used to query Network Time Protocol (NTP) information about the iBMC.
Format
ipmcget -d ntpinfo
Parameters
None
Usage Guidelines
None
Example
# Query iBMC NTP information.
iBMC:/->ipmcget -d ntpinfo
Status : enabled
Mode : manual
Preferred Server : dhcp1.com
Alternative Server : fc00::1234
Extra Server : 192.168.2.2
Synchronize : successful
Auth Enable : enabled
Group Key : imported