Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Trap Commands
- Querying and Setting the SNMP Trap State (trap -d state)
- Setting the SNMP Trap Port Number (trap -d port)
- Setting the SNMP Trap Community Name (trap -d community)
- Setting the SNMP Trap IP Address (trap -d address)
- Querying SNMP Trap Destination Information (trap -d trapiteminfo)
- Querying and Setting the SNMP Trap Version (trap -d version)
- Querying and Setting the SNMP Trap Alarm Severities (trap -d severity)
- Querying and Setting the SNMPv3 Trap User (trap -d user)
- Querying and Setting SNMPv3 Authentication and Privacy Protocols (trap -d protocol)
- Querying and Setting the SNMP Trap Mode (trap -d mode)