System Info

Product Info

Product Name

Server model.

Manufacturer

Manufacturer of the server.

Asset Label

Asset tag of the server.

Serial Number

Serial number of the server.

Value: a string of 0 to 48 bytes, allowing digits, letters, and special characters.

Location

Location of the server.

Value: a string of 0 to 64 characters, consisting of digits, letters, and special characters.

BOM Code

BOM code of the server.

Mainboard Info

iBMC Firmware Version

iBMC firmware version.

BIOS Version

Basic input/output system (BIOS) version.

CPLD Version

Complex programmable logical device (CPLD) version.

iBMC Primary U-Boot Version

Version of the primary image of the Universal Boot Loader (U-Boot).

iBMC Secondary U-Boot Version

Version of the secondary image of the U-Boot.

PCB Version

Printed circuit board (PCB) version.

Board ID

Board ID.

Mainboard Manufacturer

Manufacturer of the mainboard.

Mainboard Model

Mainboard model.

Mainboard Serial Number

Mainboard serial number.

BOM Code

BOM code of the mainboard.

System Software

Computer Name

Computer name defined by the server OS.

Computer Description

Supplementary information about the server.

OS Version

OS version.

Domain/Workgroup

Domain name or workgroup on the OS of the server.

iBMA Service

iBMA version.

iBMA Running Status

iBMA running status.

iBMA Driver

iBMA driver version.

OS Kernel Version

Kernel version if the Linux OS is used.

CPU information

Provides the following information about each CPU installed in the server:

• Name, manufacturer, model, CPU ID, clock speed, and serial number of each processor
• Number of cores and threads
• L1, L2, and L3 cache capacity
• Processor status
• Other parameters

NPU information

Provides the following information about each NPU installed in the server:

• Name, manufacturer, model
• Power
• Firmware version
• Die ID

Basic information

Provides the following information about the memory:

• Maximum and actual number of DIMMs
• Name, manufacturer, capacity, clock speed, type and location of each DIMM

Details

Click to the left of the DIMM name to display other information about the memory, including the part number, serial number, bit width, number of ranks, minimum voltage, and type details.

• Complete network information can be displayed on the Network Adapters page only after iBMA 2.0 has started.
• If iBMA 2.0 has not been installed on the server, obtain the latest iBMA documentation and software package and install iBMA 2.0.

Ethernet NICs

Displays information about LOMs, and PCIe NICs, which includes the NIC name, manufacturer, model, chip model, chip vendor, PCB version, board ID, connected resource (CPU, PCH or PCIe switch), bus information, and PCIe slot information.

• Click an ethernet NIC name to view detailed port information, which includes the port number, port status, port type, media type, speed, and support for auto-negotiation and full duplex.
  NOTE:

  The port status in the Port Properties area can be any of the following:

  • --: The iBMA is not installed on the server, and the physical connection status cannot be obtained.
  • Connected: The iBMA is not installed on the server, and the physical link is connected.
  • Disconnected: The iBMA is not installed on the server, and the physical link is not connected.
  • NoLink: The iBMA has been installed on the server, the port is not connected, but the port status is Up.
  • LinkUp: The iBMA has been installed on the server, the port is connected, and the port status is Up.
  • LinkDown: The iBMA has been installed on the server, and the port status is Down.
• Click of a NIC to view its network attributes. The network attributes include the name, firmware version, driver name and version, bus information, MAC address, permanent MAC address, IPv4 address (address/subnet mask/gateway), IPv6 address (address/prefix length/gateway), and VLAN information (VLAN ID, VLAN status, and VLAN priority settings) of each network port.
• Click at the lower part of the port attribute to display the connection view. The connection view provides information about the switch name, switch connection ID, ID of the port connected to the switch, and the switch port VLAN ID.
• Click at the lower part of the port attribute to display the DCB information and Ethernet statistics of the NIC.
• If an optical module is connected to the network port, you can click at the lower part of the port attribute to display the optical module information and alarm threshold information. The optical module information includes the manufacturer, SN, component name, device type, device connector type, Rx_LOS state, Tx_Fault state, wavelength, and device identifier, and current temperature, transmit bias current, transmit power, and receive power.
• If an electrical cable is connected to the network port, you can click at the lower part of the port attribute to display the cable information. The cable information includes the manufacturer, SN, component name, device type, and device connector type.

FC Adapter

Displays FC adapter information, which includes the adapter name, manufacturer, model, chip model, and chip manufacturer.

• Click an FC card name to view detailed port information, which includes the port number, FC ID, port type, and status.
• Click of an FC adapter to view its network attributes, which include the speed, world wide port name (WWPN), world wide node name (WWNN), firmware version, and driver name and version.

Team

Displays aggregated network port information, which includes the port name, status, working mode, IPv4 and IPv6 information (address/subnet mask/gateway), MAC address, and VLAN information (VLAN ID and whether VLAN and VLAN priority are enabled).

Click a port name to view detailed port information, which includes the NIC name, Eth name, port number, MAC address, and status.

Bridge

Displays bridge port information, which includes the port name, status, IPv4 and IPv6 information (address/subnet mask/gateway), MAC address, and VLAN information (VLAN ID and whether VLAN and VLAN priority are enabled).

• Click a bridge network port name to view detailed port information, which includes the port name, number, status, type, and media type.
• Click of a bridge port to view detailed information.

Sensor Name

Identifies a logical module or physical entity that monitors indicators of the server.

Current Value

Current value of an indicator.

Status

Status of a threshold sensor.

• OK: The sensor is working properly.
• --: The sensor does not obtain indicator information.
• NC: The sensor detects a minor alarm.
• CR: The sensor detects a major alarm.
• NR: The sensor detects a critical alarm.

Critical Lower Threshold

Lower threshold set for a sensor to generate a critical alarm.

Major Lower Threshold

Lower threshold set for a sensor to generate a major alarm.

Minor Lower Threshold

Lower threshold set for a sensor to generate a minor alarm.

Minor Upper Threshold

Upper threshold set for a sensor to generate a minor alarm.

Major Upper Threshold

Upper threshold set for a sensor to generate a major alarm.

Critical Upper Threshold

Upper threshold set for a sensor to generate a critical alarm.

Search

You can enter a keyword in the Search text box to search for sensor information.

Drive Backplanes

Provides drive backplane information:

• Maximum and actual number of drive backplanes
• Name, location, manufacturer, No., type, PCB version, CPLD version, board ID, part number, and serial number of each drive backplane

Riser Cards

Provides riser card information:

• Maximum and actual number of riser cards
• Name, manufacturer, slot, type, PCB version, board ID, part number, and serial number of each riser card

xPU Boards

PCIe Cards

Provides PCIe card information:

• Maximum number of PCIe cards and number of present PCIe cards
• Description, location, manufacturer, slot number, vendor ID, device ID, sub-vendor ID, sub-device ID, and connected resource of each PCIe card

Leakage Detection Cards

Security Module

Provides security module information:

• Maximum and actual number of security modules
• Specification type, specification version, manufacturer, manufacturing version, and self-test status of each security module