Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Conversion Failure Due to the Infershape Failure
Symptom
Model conversion fails, and the log message "Run ge_passes infershape for preprocess failed" is printed, as shown in Figure 3-8.
Possible Cause
The input of the operator is incorrect.
Solution
Perform the following steps to rectify the fault:
- Locate the cause of the infershape implementation failure of the operator that reports the error, and check whether the infershape implementation of the previous operator is correct.
- Continuously trace operators with infershape implementation exception.
