Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring PFC Deadlock Detection
If the CE8850-64CQ-EI is used as the aggregation switch, the recommended configurations are the same as those for access switches in Configuring PFC Deadlock Detection.
If the CloudEngine 16800 is used as the aggregation switch, software-based deadlock detection is enabled by default when PFC is enabled. If hardware-based deadlock detection is required, refer to Configuring PFC Deadlock Detection to enable this function.