Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Device Deployment
- Deploy devices.
You can enable the automatic deployment function and then adjust the devices or manually deploy devices.
- Automatic deployment: Enable this function after drawing obstacles and setting areas. Select Automatic deployment, Equal triangle laying, or Equal spacing laying and perform operations as prompted.
- Manual deployment: You can manually deploy devices after drawing obstacles. Select a device model under Equipment Deployment. The tool provides multiple device types, including APs, RUs, ADs (central APs), and switches. After device selection, click on the drawing to deploy devices, and then right-click to end the deployment.
- Adjust device parameters.
After device deployment, set device parameters.
- After manual deployment is complete, you can click Channel calculation and Power Tuning to reduce interference between APs.
- To batch adjust APs of the same attributes on the same floor, right-click an AP, choose Similar, and adjust the attributes.
- To adjust a single AP, double-click an AP or right-click the AP and choose Property, and set AP attributes, including frequency band, channel, power, frequency bandwidth, and supported protocol.
