Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Signal Simulation
- Set and open the simulation diagram.
- On the toolbar on the right, select the frequency band and simulation map type under Simulation Map Settings. You can set the RSSI color under Simulation Diagram.
- Click Open simulation to start signal simulation. In the simulation result, signal strengths are represented by different colors. Then, click Coverage satisfaction to view the signal strength coverage statistics.
- Adjust and update the simulation result.
- If the signal coverage does not meet the requirement, manually adjust the device deployment and click Refresh simulation to obtain the recalculated simulation result.
