Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Environment Setting
- Set the scale.
Click on the drawing as prompted to start setting the scale. Set the start point and end point, and set the length based on site requirements.
- Set obstacles in the environment.
You can enable the automatic obstacle identification function and then manually adjust the obstacles. Alternatively, you can manually draw obstacles. For example, you can select an obstacle shape and type and draw obstacles on the drawing. Click to start drawing and then right-click to stop drawing.
- Deploy interference sources.
If interference sources exist in the scenario, deploy interference sources on the drawing based on the site survey result.
