Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Network Planning Procedure
Preparation — Drawing Import
After a project is created, the tool page is displayed. Move the cursor to the name area as prompted (you can click No longer prompt to disable prompts).
On the expanded floor management panel, you can click the Create building or Create area icon. The following uses the indoor scenario as an example.
- Click the Create building icon
. In the Create dialog box, set the scenario type, enter the building name, and click Select File. In the displayed dialog box, select a scenario and sub-scenario.
- After scenario selection, select the drawing to be imported, which can be in PDF, PNG, or JPG format. Click OK.
. In the Create dialog box, set the scenario type, enter the building name, and click Select File. In the displayed dialog box, select a scenario and sub-scenario.
