Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Region Setting
- Set the network coverage.
You can use the automatic area identification function or manually draw a coverage area. The following uses manual area drawing as an example. Select an area shape and type and draw an area on the drawing.
- Drawing a rectangle area: Click and drag on the drawing and then release the left mouse button to draw a rectangle area. To exit drawing, press Esc, click another tool, or right-click.
- Drawing a polygon area: Click on the drawing to set the start point, and then right-click the mouse to complete the drawing. To exit drawing, press Esc, click another tool, or right-click.
- Set the network capacity.
Configure terminal information for each coverage area. Design the network capacity based on the terminal type, number of access terminals, and bandwidth requirements.
